Best Copper Tube Extrusion Tool 2021, Buyer’s Guide

P

lumbers often need to affect leaking copper pipes that they cut and mend. it’s tough cutting through such sturdy pipes, but because of copper pipe cutters, plumbers can breathe a sigh of relief.

These cutters work fast, deliver clean cuts, and offer the much-needed convenience that traditional tools don’t provide.

Read on for our expert reviews of the simplest copper pipe cutters available. Check the newest prices to make sure you get an excellent deal!

Features to seem for during a Copper Pipe cutter?
If you’ll handle minor plumbing issues on your own, you ought to have a copper hand tool handy. The features that make a superb copper hand tool are as follows.

Thumb-type
Copper PipeThumb-type cutters are ideal for working in tight locations. If you’re handling thin pipes, but got to cut at an angle, don’t consider before purchasing a thumb-type cutter. they will help traverse pipes up to 1-inch diameter will hardly any effort.

Handle and Body
If you would like to chop significantly larger copper pipes, you ought to specialize in a much bigger handle and body. These will assist you to rotate the cutter around the pipe. Most of the quality copper pipe cutters accompany in-built reams that deliver a clean and smooth cut. you’ll get to fit or solder the pipe later. employing a big cutter will provide the right finish that creates the soldering process easier.

Auto Cutters
Apart from manual copper pipe cutters, you furthermore may get auto cutters. they’re also suitable for working in tighter conditions. You don’t get to tighten the tool after each rotation. it’ll do everything automatically.

Your selection of copper hand tools depends on the aim that you’ll use the tool. Invest during a branded copper hand tool in order that it lasts for years without requiring repairs.

How does one Use a Copper Pipe Cutter?
Cutting a copper pipe using a complicated cutter is child’s play for many plumbers. those that want to undertake this reception should follow the steps below:

Disclosure: As an Amazon Associate I earn from qualifying purchases. If you make a buying deal through these links, I will be able to earn a commission at no extra cost to you. There are other affiliate links too. This disclosure pertains to all or any product links.

1

MASTERCOOL 72485-PRC Silver/Blue

This MASTERCOOL dreams up GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8″. Thus, copper tube aircon Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2″, metric bubble Flare 4.75, 6, 8, and 10 mm. Furthermore, cupro nickel fittings GM transmission cooling Line 3/8 and 1/2.

In addition, Universal Fit, 5.851 kilograms.

  • Manufacturer: Mastercool
  • Item Weight: 12 pounds
  • Package Dimensions: 15 x 10.2 x 3 inches
  • GM gas line Flare, Brake Lines, and transmission 5/16 and 3/8″
  • Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2″, metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2
  • Fit type: Universal Fit
  • Package Weight: 5.851 kilograms

2

iGeelee Copper Tube Expander IG-300A

This iGeelee invented Free-floating and self-centering expander mechanism. Also, connecting copper pipe to plastic With a long handle grip pad comfortable operating lever. Mechanism design reduces the force needed. It can easily expand tubing from 10mm to 42mm in diameter. Moreover, copper tube extrusion The hydraulic tubing expander is made of aluminum alloy. Light to carry. Seven tube expander head dies to choose for the different tubes.

In addition, The tube expander tool is suitable for soft copper tubes, aluminum tubes, titanium tubes, soft steel, and other soft tube save cost material.

  • Manufacturer: iGeelee Co., Limited
  • Item Weight: 7.96 pounds
  • Package Dimensions: 17.95 x 10.59 x 4.37 inches
  • Material: Aluminum
  • Free-floating and self-centering expander mechanism.
  • With an extended handle grip pad comfortable operating lever.
  • Mechanism design reduces the force needed.
  • It can easily expand tubing from 10mm to 42mm in diameter.
  • Expander Size: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″.
  • One Hydraulic Tube Expander
  • One Tube Cutter
  • One Deburring tool
  • Seven Expander Heads
  • One pair of gloves
  • One Carrying Box

3

Senmit Hydraulic Crimper with 11 Die Sets

This Senmit created lug crimper has a true 11 US ton capacity, is designed for six gauges through 600mcm, providing perfect crimp terminations with every use. Likewise, copper tube Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable lug crimper will do an outstanding job. Furthermore, copper tube aircon Featuring a black oxide crimp head and dies which are guaranteed not to chip or flake, this lug crimper is much better than classic chrome-plated models, for enhanced performance.

In addition, install the die set that matches your terminal size, rotates the release valve to close it, pump the handle until the resistance felt becomes significant.

  • Manufacturer: Senmit
  • Item Weight: 12.93 pounds
  • Package Dimensions: 19.1 x 7.3 x 3.7 inches
  • Material: Stainless Steel
  • Kit includes: 7 AWG die sets: 6, 4, 3, 2, 1/0, 2/0, 4/0, 5 MCM die sets: 250, 300, 350, 500, 600, hydraulic rebuild kit, portable moulded case
  • Forged crimping head
  • No chipping, no flaking
  • 360-degree rotatable crimp head reaches in tight places
  • Designed for six Gauge through 600 MCM
  • Only copper, not aluminum lugs
  • User-friendly, professional long-lasting results.

4

IWISS Pex Pipe Crimping Tool kit

This IWISS think up Compare to the old one(Blue handle), the IWS-3801SH is much lighter. Therefore, cupro nickel fittings The crimper in this tool kit is shorter but easy to use even for females, without the requirement for strength. The crimping force and result will not decrease. Moreover, connecting copper pipe to plastic Meet ASTM F1807 Standard. Used to fasten PEX pipe to brass or poly fittings using copper crimp rings.

In addition, New Product, smaller and lighter but provide same pressure, no requirement for strength.

  • Size: IWS-FA(Long version with Cutter Removal)
  • Manufacturer: IWISS
  • Item Weight: 5.7 pounds
  • Package Dimensions: 18.9 x 8.5 x 2.7 inches
  • Built-in 1 inch crimper equipped with three interchangeable jaws 3/8,1/2,3/4-inch for normal regular size plumbing installation
  • All jaws are well polished to make sure reliable compression and no damage to the fittings
  • Long service life with calibration function on both handles
  • Well polished tool frame for secure operation
  • Quick & Easy to vary different size jaws
  • Easy to hold with as all items are stored during a case
  • Meet ASTM F1807 Standard
  • With Interchangeable jaw set 3/8,1/2,3/4-inch, the tool itself is 1-inch
  • Crimp Ring Removal Tool, which wont to Remove 1/2-inch to 1-inch copper ring
  • With Go/No-Go Gauge and spanner Suitable for narrow space and pipe maintenance
  • Toolsets wont to fasten PEX pipe to brass or poly fittings using copper crimp rings

5

Hydraulic Cable Crimper Hand Tool

This Hydraulic Cable comes up with The crimping tool is made of 45cr steel, with strength and good toughness. Thus, copper tube extrusion Uniform heat treatment technology, make the product not easy to break, increase the product’s service life. Crimps 12 AWG – 2/0 AWG size copper and aluminum wires. The crimping range is from 4 – 70 mm². Furthermore, copper tube This hydraulic crimper tool comes with nine pairs of dies. Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 AWG, and 2/0 AWG cables.

In addition, Good choice for battery and welding cables, power wires, electrical cables, etc.

  • Manufacturer: CXX
  • Item Weight: 6.82 pounds
  • Package Dimensions: 14.84 x 8.27 x 3.5 inches
  • Material: Other
  • The crimping tool is formed of 45cr steel, strength, and good toughness. Uniform heat treatment technology, make the merchandise tough to interrupt, increase the product’s service life.
  • Crimps 12 AWG – 2/0 AWG size copper and aluminum wires. 
  • This hydraulic crimper tool comes with nine pairs of dies. with crimping dies for 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 AWG, and 2/0 AWG cables. 
  • Good choice for battery and welding cables, power wires, electrical cables, etc.
  • One Hydraulic Hand Crimper
  • Nine Sets of Crimping Dies
  • One Seal Rings
  • A Pair of Gloves
  • One Carrying Case

6

FW Wall 16 Ton Hydraulic Wire Crimper Cable

This FW Wall forms The crimper tool crimps AWG 6 to 600 MCM size copper and aluminum wires. Also, copper tube aircon Great for battery and welding cables, power wires, and electrical cables. Dies are made of hardened steel with a chrome finish, and the excellent accessories improve work efficiency. Moreover, cupro nickel fittings The convenient on/off knob for simple ram retraction. The head could be rotated 180°freely for narrow space working. The ergonomically designed comfortable handle offers a soft tight grip and easy control with non-slippery. The hydraulic crimper has a small magnet in the top designed to hold the top die on the tool. 

In addition, a Hydraulic Hand Crimper with 11 sets of hexagon crimping dies, a strong protective carrying case that makes it portable to carry, a cable cutter, and pair of work gloves.

  • Max pressure: 16 Ton
  • Stroke Capacity: 22mm
  • 11 pairs of hexagon crimping dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm²
  • Manufacturer: FW Wall
  • Item Weight: 13.57 pounds
  • Package Dimensions: 20.7 x 8.2 x 4.2 inches
  • Material: Metal
  • With the high-quality hydraulic crimper tool, you’ll crimp wires and butt connectors on a good range of wire sizes.
  • The crimper tool crimps AWG 6 to 600 MCM size copper and aluminum wires. Maximum crimping power: 16 Tons. Stroke Capacity: 22mm. 
  • The top might be rotated 180°freely for narrow space working.
  • The hydraulic crimper features a small magnet within the top designed to carry the highest die on the tool. No got to use a hexagon wrench to exchange the die, which saves some time and energy. 
  • Includes Hydraulic Hand Crimper with 11 sets of hexagon crimping dies, strong protective carrying case which makes it portable to hold, cable cutter, and pair of labor gloves.
  • One 16-Ton Crimper
  • One Dies
  • One Plastic Case
  • One Cable Cutter
  • One Work Gloves

7

4LIFETIMELINES Universal Hydraulic Tube Flaring Set

These 4LIFETIMELINES conceive 45 degrees SAE Inverted, ISO bubble, Push-Connect, GM fuel line, and single flares quickly. Likewise, connecting copper pipe to plastic Use to flare steel, stainless steel, and copper-nickel tubing. Furthermore, copper tube extrusion Includes retaining jaws and dies to create 3/16, 1/4, 5/16, 3/8, 1/2, 4.75mm, 6mm, 8mm, and 10mm flares. Operate one-handed in tight quarters on the vehicle or of the vehicle.

In addition, 4LifetimeLines takes pride in producing the tools in the aftermarket automotive industry, and we back them behind our lifetime warranty.

  • Manufacturer: 4LifetimeLines
  • Item Weight: 14.23 pounds
  • Product Dimensions: 14 x 17.5 x 3.5 inches
  • Create perfect 45 degrees SAE Inverted, ISO bubble, Push-Connect, GM gas line, and single flares quickly.
  • Use to flare steel, chrome steel, and copper-nickel tubing
  • Includes retaining jaws and dies to make 3/16, 1/4, 5/16, 3/8, 1/2, 4.75mm, 6mm, 8mm, and 10mm flares
  • Operate one-handed in tight quarters on the vehicle or off the vehicle
  • 4LifetimeLines takes pride in producing the tools within the aftermarket automotive industry, and that we back them behind our lifetime warranty

8

SHZOND Manual Pipe Tube Bender Set

OVERVIEW:

This SHZOND produce tube bender is widely used in but not limited to the building industry, chemical plant, central heating, shipping, machine manufacturing, house decorating, construction sites, garage, and repair shop. Therefore, copper tube Able to apply for wire pipe, circle-steel pipe, and low-pressure liquid jointing pipe. Suits pipes made of wrought copper, brass, aluminum, stainless steel, etc. Moreover, copper tube aircon Come with various measures of bending molds and formers, a longer handle for more labor-saving

In addition, The manual pipe bender is easy to operate and convenient to maintain.

  • Manufacturer: SHZOND
  • Package Dimensions: 21.6 x 9 x 6.7 inches
  • Color: Tube bender
  • Material: Metal
  • Manual tube bender bending formers : 3/8″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8in, 1″.Wall Thickness of Pipe :0.03”-0.078”.Total Length with handle on :33.5″
  • Tube bender external diameter of half circle : 3.15″,3.94″,4.92″,5.5″,5.9″,7.68″,7.68″.Net Weight : 50.5lbs
  • Come with various measures of bending molds and formers, longer handle for more labor-saving
  • The manual pipe bender is straightforward to work and convenient to take care of 
  • Able to apply for wire pipe, circle-steel pipe, and low-pressure liquid jointing pipe.Suits pipes made from wrought copper, brass, aluminum, steel, etc.
  • The main part of manual tube bender One
  • Bending formers One
  • Half-circle bending molds One
  • User manual One

9

IBOSAD 2 in 1 Hydraulic Flaring and Swaging Tool Kit

OVERVIEW:

This IBOSAD developed Made of durable hardened aluminum alloy, be lightable. Thus, cupro nickel fittings Once the die and adapter are secured in the fixture, a few pumps of the handle, and you’re done. Furthermore, This tool takes the work out of swaging and flaring, especially on larger tube sizes.

In addition, Only for AC components. 

  • Manufacturer: IBOSAD
  • Item Weight: 13.27 pounds
  • Package Dimensions: 18.23 x 13.9 x 4.17 inches
  • Style: WK-400
  • Material: Aluminum
  • Made of durable hardened aluminum alloy, be lightable.
  • This tool takes the compute of swaging and flaring, especially on larger tube sizes.
  • Not for Brakeline Fuel Transmission Automotive Brake Line
  • Only for AC components
  • Imperial Standard:3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8
  • This kit features a hand-held press that accurately flares & swages copper tubing.
  • Made of durable hardened aluminum alloy, be lightable.

10

ABN Copper Tubing Bender Kit

OVERVIEW:

This ABN dreams up of kinking tubes when making tight turns, use the ABN 3/8-7/8 Inch Forward & Reverse 90-Degree HVAC Tube Bender Tool Kit to get plumbing and HVAC jobs done right the first time. Also, connecting copper pipe to plastic can be used with soft copper thin-walled tubing that needs to be contoured accurately and cannot be allowed to collapse while bending. This tool can be used in HVAC, radiant heat, refrigeration, air conditioning, and hydraulic system applications to create one 90-degree bend at a time. Moreover, copper tube extrusion The radius of the created bend depends on the tube diameter (3/4-inch bend has an approximate 10-inch radius while 1/2-inch bend has an approximate 6-inch radius). We recommend lubricating benders between uses to prevent flattening tubes. This kit includes all items required to bend 3/8, 1/2, 5/8, 3/4, 7/8 inch OD tubing.

In addition, This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects, or other reproductive harm.

  • Manufacturer: ABN
  • Item Weight: 9.28 pounds
  • Product Dimensions: 14.75 x 3.25 x 11.9 inches
  • Material: Aluminum, plastic
  • The ABN 3/8-7/8 Inch Copper Pipe Bender Tool may be a ratchet crossbow style pipe bending tool for bending soft copper, aluminum, and thin-walled hydraulic tubing up to 90 degrees in both forward and reverse applications.
  • Includes (5) quick-change mandrels (3/8, 1/2, 5/8, 3/4, 7/8 inch tubing pipe bender dies) for a 1/8 to 7/8 inch outer diameter (OD) cutting range; 
  • Aluminum mandrel dies, chrome-plated hardened cutting wheel, nylon plastic support block knobs, and handle
  • The reverse bender attachments allow tight 90 degree bends to be made easily out of a wall or other difficult places.

Conclusion:

Measure the part of the pipe you would like to chop.
Take a high-quality copper hand tool and obtain the cutter blade aligned to the mark you made on the pipe.
Try to get the blade as on the brink of the mark as possible. this enables the spring-load tooth to grab the pipe firmly. Use the tightening dial to make sure that the cutter sits tightly on the copper pipe.
The cutter will provide a cozy tension, enough to maneuver the blade and make a score on the mark.
Rotate the cutter around the mark. this may confirm that the blade makes the right score round the pipe. It eliminates the necessity to string the pipe before cutting.
Once you’ve got the initial groove set, you’ll tighten the cutter. Spin or rotate the cutter around the mark vigorously. With every turn, you’ll tighten the blade for quicker results. This won’t release the strain while cutting the pipe.
Keep doing this until you are feeling the blade cutting through the copper. hamper once the blade starts dissecting the pipe. this may provide a clean and even cut.

Leave a Reply

Your email address will not be published. Required fields are marked *